Produse pentru pentru aer (21)

The compressor stations are built with as few electronic components as possible and can all run continuously with a relatively low noise level and a minimum level of service is required. The oil-free compressor line is offering reliable compressed air with a long lifetime that fits the air requirements for our nitrogen generators, when a complete solution is needed! Features Internal coated receiver Oil-free compressor High durability Long lifetime for demanding applications Mounted in noise reduction cabinet

OZ1000, OZ1000T & OZ2000 - AIR PURIFIER​ THE BEST AIR PURIFIERS AGAINST MOLD AND MUCH MORE REMOVE MOLD, FUNGI AND ODOR WITH THE EFFECTIVE UV-C AIR PURIFIER UP TO 99,84% The OZ series are UV-C air purifiers that purify and sanitize the surfaces with up to 99,84% within 1 hour. The OZ series are environmentally friendly because they do not use any chemicals or filters. Ensures healthy indoor climate Affordable for everyone Plug and play UV-C Air Sanitizer Removes odor from fabrics Tested and documented By a special UV-C lamp inside the machine, it will purify the air fast and effectively.

Inflammable HC R290 Refrigerant Wholesale Price For Air Conditioner Molecular Formula:CH3CH2CH3 Molecular Weight:44.1 Boiling Point ºC:-42.1 Density 30° C(kg/m3):96.6 Critical Temperature (ºC):96.6 Critical Pressure (MPa):4.248 GWP:3.3 Weight:56 kg Dimensions:122 × 121 × 451 cm

The wireless sensor set is designed specifically for those who want better insight into various air quality parameters in their facility.

EFR Heizgerät für Luftheizsysteme, u. a. als Zusatzheizung bei Wärmerückgewinnungsanlagen in Wohngebäuden oder im Zusammenhang mit Luftkanalsystemen. Der Kanalteil ist ein rundes, feuerverzinktes Stahlrohr mit einem Gummidichtungsring an beiden Enden. Der Klemmenkasten au verzinktem Stahl mit einer Verschraubung M20 (IP44) versehen. Die Heizelemente werden aus AISI 304 hergestellt. 1-polige Thermosicherung (30-87 ºC) mit automatischer Wiedereinschaltung sowie manueller Rückstellung (125 ºC). EFFK Heizregister, das für die Flanschmontage in rechteckigen Kanälen von Klima-, Wärmerückgewinnungs- und Lüftungsanlagen ausgelegt ist. Kanalteil aus feuerverzinktem Stahl, Eingebaut ist ein Temperaturbegrenzer mit automatischer Wiedereinschaltung und ein Brandthermostat mit manueller Wiedereinschaltung. Der Lufterhitzer ist aufgeteilt in Gruppen zu jeweils 3 oder 4 je nach Leistungsstärke.

The iGRAIN Plenum Pressure Sensor confirms that the aeration control takes place at the right time. Situated in the silo plenum space or in the transition box from the aeration fan, the pressure sensor confirms that the aeration fan is running; this is necessary because when the iGRAIN dashboard software determines that the fans should run, then an alarm will be triggered if it does not happen. And vise versa, if the fan is running when the software has calculated it is not advantageous, then another alarm will be triggered. The pressure sensors are connected to the iGRAIN AIO-Hub. A CAT6 cable can be used for both power and the MODBUS data communication. The AIO-Hub can be connected to other sensors in the AIO family since they share the 24 VDC and the universal MODBUS communication protocol.

The compressor stations are built with as few electronic components as possible and can all run continuously with a relatively low noise level and a minimum level of service is required. The oil-free compressor line is offering reliable compressed air with a long lifetime that fits the air requirements for our nitrogen generators, when a complete solution is needed! Features Internal coated receiver Oil-free compressor High durability Long lifetime for demanding applications.

High quality nitrogen generator for external air supply. Mounted in ruggedized stainless steel cabinet. Optional integrated oxygen sensor. Floor mounting. Features Modbus TCP/IP VNC connection for display (Remote Connection) “Plug and Play” – CE marked

High quality nitrogen generator for external air supply. Mounted in ruggedized stainless steel cabinet. Optional integrated oxygen sensor. Wall or floor mounting possible. Features Modbus TCP/IP VNC connection for display (Remote Connection) “Plug and Play” – CE marked

Air Conditioner R410a Refrigerant Aircon Molecular Weight:72.58 Boiling Point:101.3KPa(° C) -51.6 Density 30° C(kg/m3):1038 Critical Temperature (° C):72.5 Critical Pressure (MPa):4.95 GWP:2000 Weight:56 kg Dimensions:122 × 121 × 451 cm

OZONE & UV AIR DISINFECTION SYSTEM SURFACE DISINFECTION​ Due to increasingly higher hygiene demands in the food processing industry etc., the use of UV-C light to eliminate microorganisms e.g. bacteria, fungi, and viruses, is becoming more and more commonly used. UTOMATIC DISINFECTION OF SURFACE DISINFECTION​ Efficient disinfection – without manual procedures, chemicals or water With the introduction of the UV-C-based disinfection of surfaces, we now add yet another field of application to our patented UV-C technology, which has been awarded the EU Environmental prize and which since 1993 has been used in self-produced air cleaners – systems which are used for removing obnoxious smells, improving the indoor climate as well as reducing the danger of fire and infection hazards.

AC Refrigerant R410A Used In Air Conditioners Height:420mm Material:DC04 Diameter:241mm Capacity:13.3L Working Pressure:2.8Mpa Gas Purity:99.91%-99.97% Gas N.W:11.3KG/25lb Packing:carton size 24.5*24.5*42.5cm Thickness:1.5mm Weight:3.5kg Filling Gas:R410A/R32 Dimensions:122 × 121 × 451 cm

PROFESSIONAL AIR PURIFICATION FOR PUMP WELLS INDUSTRIAL AIR CLEANING WITH NO FILTERS OR CHEMICALS WHAT CAN THE HS PURIFIER DO FOR YOU? HS Purifier forindustrial air cleaning use photolytical oxidation to purify the air from the gas, hydrogen sulfide (H2S). When the H2S level reduces significant, you will protect the electronic from the cabinet by the pump well. If the pump well is located close to a neighbor, then you also avoid neighbor complaints, because the odor is reduced significant. The HS Purifier is easy to install in any pump well, and like the rest of the JIMCO products, HS Purifier is running as an environmentally friendly professional air purification solution. JIMCO’s environmentally friendly technology takes basic in photolytical oxidation, and the technology can be used to purify both air and water without any use of chemicals or filters in the industrial businesses.

The refrigerated air dryers from FLAIRMO have incorporated several unique design features to give a long lifetime with minimum and easy maintenance. The compact dryers give you an efficient drying with low pressure drop and it will give the air system a longer lifetime Features State of the art design ensures a constant 3°C pressure dew point. High efficiency stainless steel heat exchanger. Environmentally ozone friendly R134a and R407C refrigerant. Conforms to stringent ISO8573-1 standards.

High quality Nitrogen Generator with integrated oil-free compressor. Mounted in ruggedized stainless steel cabinet. Wall or floor mounting possible. Features Long Life & Low Maintenance Easy Installation

WHAT CAN THE UV-C VENTILATION SYSTEM DO FOR YOU No matter if you work in an open office, on a ship, factory etc. a good ventilation system is essential for your well-being. Especially if you are staying in a building without windows to open to get fresh air and drafts. The JIMCO Virus and Bacteria Control system is placed in the ventilation system. As virus and bacteria travels through the ventilation system they can easily be distributed from one room to another. Did you know? All JIMCO products will be specially produced to your business. No matter where and which products you order, we will always make sure that the products fit to your areas. That is why we also offer extra install services, so our super advisors adapt your needs. Ventilator bacterial with no filter are environmentally friendly and runs without any use of chemicals, filters, or Ozone.

Northern Light® is the most efficient system for disinfection and distribution of clean air*. The product line of patented HVLS fans comes with integrated UVC light in the air blades. The fan silently circulates massive amounts of air across the UVC lamps elegantly integrated on the upper side of the air blades. This effectively deactivates airborne pathogens as they’re continuously exposed to UVC light.

OZONE & UV-C SURFACE DISINFECTION The environmentally friendly disinfection machine FLO-D Mini Mark 2 has the unique UV-C & Ozone technology which impacts the performance significantly. Disinfect with more than 99,99% with FLO-D Mini Mark 2 without filters, chemicals, or water. The machine is easy to move around and can be used in multiple locations. You will also be able to data log your ozone & UV-C surface disinfection, so you have documentation for your treatment. Save money with the UV-C & Ozone surface disinfection treatment: For the food industry, disinfection has always played an important role. For example, ethylene, mold and yeast shorten the time in which the food stays fresh. In the fruit industry, among other places, mold and yeast growth is a tough opponent affecting product lifespan. To keep the food fresh, you can use the FLO-D Mini Mark 2 to reduce the bacteria, mold and yeast in the cold storage.

Kommen in Bereichen mit verschärften Anforderungen an Haltbarkeit, Materialien und Leistungsfähigkeit zum Einsatz. Der Heizlüfter kann auf Baustellen und Schiffen verwendet werdet, aber auch für eine dauerhaftere Installation in Industrie-, Sport- und Lagerhallen, Garagen, Gartenhäusern, Werkstätten und anderen Räumlichkeiten, aus denen schnell und effizient Feuchtigkeit oder Kälte entfernt werden soll. Der DELTA Heizlüfter kann mit einer Leistung von 3 bis 21kW und mit einer Spannung von 1x110V bis 3x690V + PE produziert werden und ist bei 50 oder 60Hz einsetzbar. Die Schutzart von elektrischen Komponenten beträgt: IP44 (3-9kW) und IP34 (15-21kW). Der DELTA Heizlüfter ist standardmäßig transportierbar, kann jedoch durch Verwendung einer Wandhalterung in ein fest montiertes Gerät verwandelt werden.

AIR CLEANING FOR INDUSTRY WITHOUT FILTERS OR CHEMICALS FLO-P AIR-CLEANING UNITS FOR THE REDUCTION OF GREASE AND ODOR FROM INDUSTRIAL EXHAUSTS ​The JIMCO industrial air purification systems are normally made according to client’s specific requirements. There are two main considerations when designing the air treatment system. The first step is to calculate the unit size to treat the air successfully. This is based on the process air organic content, air temperatures, air flowrates, grease, and odor destruction requirements, etc. The second step is to configure the installation to meet space requirements because frequently space is at a premium in process plants. Over the years JIMCO has designed units that can be floor, ceiling, wall, or roof mounted to suit the installation requirements of all our clients. Access for maintenance is also carefully considered. In February 2000 JIMCO received the EU Environmental Award for Cleaner Technology.

High quality nitrogen generator with integrated long life oil-free compressor. Mounted in noise reduction cabinet. Optional integrated oxygen sensor. Features Long Life & Low Maintenance Easy Installation Modbus TCP/IP VNC connection for display (Remote Connection) “Plug and Play” – CE marked